Trevi CMP 510 DAB Guia Del Usuario página 13

CMP 510 DAB
DAB RADIO MENU
1. Press for a few seconds MENU/INFO (4) button on unit or MENU (21) button on the remote control to access
the DAB menu;
2. Press the key (8) on the unit or the key
DAB menu;
3. Press ENTER/
item:
Full scan: allows you to scan the entire DAB/DAB+ band and automatically store the stations found.
Preset Recall: allows you to recall a radio station stored in one of the 30 available memories.
Preset Store: allows you to save a radio station in one of the 30 available memories.
Manual tune: allows you to manually scan a single DAB/DAB+ frequency. Press button
to select the channel number for the frequency to be scanned and then press ENTER/
to start scanning. The stations found will be automatically memorized. At the end press and hold the MENU/
INFO (4) button on the unit to return to the DAB menu.
DRC: allows you to enable/disable the DRC function to improve the sound when listening in noisy environments. The
option with the ✳ symbol is the one set. You can set the DRC level high, low or OFF.
Prune: allows you to delete all the radio stations found but not available (poor signal) from the list of stored stations.
Move with the button
on the unit.
TA: allows you to activate or not the traffic alert (traffic announcements), or to automatically tune in to radio stations
that broadcast traffic information. Move with the button
with ENTER/ (9) button on the
System: allows access to the system's submenu:
Alarm: Select whether to set "Alarm 1" or "Alarm 2", use the key
ENTER/ (9) key on the
Wake up time: set the alarm activation time.
Duration: duration in minutes of the alarm clock.
Source: set the type of ringtone between Buzzer, Digital radio (DAB), FM (FM radio), DC, USB.
Frequency: Daily (every day), Once (once only), Weekends (on Saturdays and Sundays), weekdays (from
Monday to Friday).
Volume: playback volume of the alarm clock.
Preset: set which radio station to play when the alarm is activated (Last listened= the last one tuned or a
radio among those saved in the available memories).
Alarm ON/OFF: to activate or deactivate the alarm.
Time: allows you to set the current time/date.
Set Time/Date: set the current time and date.
Auto Update: select from which source to automatically set the time and date if available.
Set 12/24 Hour: set the 12/24H time format
Set Date Format: set the date format.
Backlight: allows you to set the time and brightness level of the display:
Timeout: set the time after which the display lowers the brightness without commands.
On Level: indicates the brightness level of the display when the device receives commands.
Dim Level: indicates the brightness level of the display when the appliance is inactive.
Language: allows you to select the system language.
Factory reset: allows you to restore all the settings to the factory settings. Select "Yes" for the restore.
Software upgrade: allows you to perform a scan to check for any updates available for the device.
SW version: software version installed.
DAB/DAB+ TRANSMISSION INFORMATION
In DAB mode, the display will show a series of information about the station and the track being played.
- Repeatedly press MENU/INFO (4) button on the unit or INFO (22) button on the remote control to change the
information displayed.
Note: not all DAB stations provide the information displayed by the device.
If available, the following information is available:
DLS: displays information relating to the transmitted music (artist, song title, etc...).
Program type: displays information relating to the type of program transmitted.
(9) button on the unit or
(3) or (8) on the unit to "Yes" and confirm the deletion with ENTER/
unit.
unit.
(29) on the remote control to display the various items of the
(27) button on the remote control to select the displayed menu
(3) or (8)
(3) or
(3) or
(9) button on the unit
on the unit to "Yes" or "No" and confirm
(8) on the unit and confirm with
ENGLISH
(8) on the unit
(9) button
13