Trevi CMP 510 DAB Guia Del Usuario página 14

ENGLISH
Transmitter name: displays information relating to the service transmitter.
Transmitter Number/Frequency: displays information on the number and frequency of the transmitted DAB/DAB+
station.
Signal error index: displays information relating to the level of signal errors and the intensity with which it is received.
Bit Rate: displays information relating to the compression ratio of the current transmission.
Time: displays the time.
Date: displays information relating to the date.
FM RADIO
SCAN FUNCTION
1. Fully extend the antenna (12) and select the FM source; the display will show the frequency;
2. Press the button
to increase or decrease the frequency and perform a step-by-step search;
3. Press for a few seconds the key
remote control to tune in to the next or previous radio station with the best signal received;
4. Long press the ENTER/
and automatic storage of FM stations. The first 30 stations received will be automatically stored;
5. Press F-/CH- (28) or F+/CH+ (26) buttons on the remote control to scroll through the various stored FM stations;
6. Repeatedly press the MENU/INFO (4) button on the unit or the INFO (22) button on the remote control to display
all information on the station received.
NOTE:
To obtain the best FM reception, extend and orient the antenna (12). If reception is not good try to adjust the length
and orientation of the antenna differently, however the quality of FM reception depends very much on the place
where the device is placed.
The proximity of TV sets, neon lamps or other domestic appliances may cause disturbances in the reception of radio
programs, in this case move the radio recorder away from the disturbing device.
STORING RADIO STATIONS
To store a radio station, do the following:
1. Tune to the desired radio station;
2. Press for a few seconds the MENU/INFO button (4) on unit or the MENU button (21) on the remote control to
access the FM menu;
3. Use the keys (3) or
mare;
4. Use the keys (3) or
unit to confirm and save the radio station;
Repeat this for each radio station you want to save. 30 memory locations are available.
MENU
1. Long press the MENU/INFO (4) button on the unit or MENU (21) button on remote control to enter the FM menu;
2. Press the key (8) on the unit or the key
3. Press the ENTER/
menu item.
Preset Recall: allows you to recall a radio station stored in one of the 30 available memories.
Preset Store: allows you to save a radio station in one of the 30 available memories.
Scan setting: allows you to set the search for radio stations on all stations found (All stations) or only on
those with strong signal (Strong station).
Audio setting: allows you to set audio in stereo (Stereo allowed) or mono (Forced mono).
System: allows access to the system menu (see RADIO DAB/DAB+ MENU).
CD-MP3 PLAYER
PLAYING A DISC
1. Select the CD source.
2. Open the CD compartment and insert the disc with the written side facing up. Close the door carefully;
3. After a few seconds the LCD display (1) will show the number of tracks on the disc. Playback will start automa-
tically;
14
(3) or the button (8) on the unit or the buttons
(3) or the key
(9) button on the unit or the SCAN (25) button on the remote control to start scanning
(8) on the unit and select "Preset Store", press ENTER/
(8) on the unit and select a memory location, press the ENTER/
(9) button on the unit or the button
The "CD" will appear;
(8) on the unit or the keys
(29) on the remote control to display the various FM menu items;
(27) on the remote control to select the displayed
CMP 510 DAB
(20) or (29) n the remote control
(20) or
(9) sull'unità per confer-
(9) button on the
(29) on the