The battery remaining indicator is incorrect.
This phenomenon occurs when you use the camera in an extremely hot or cold location.
•
•
The displayed battery remaining differs from the current one. Fully discharge and then charge
the battery pack to correct the display.
The battery pack is discharged. Insert the charged battery pack (page 10).
•
The battery pack is dead. Replace it with a new one.
•
Cannot charge the battery pack.
You cannot charge the battery pack using the AC Adaptor (not supplied).
•
Shooting still images/movies
Your camera cannot record images.
Check the free capacity of the internal memory or "Memory Stick Duo" (page 28). If it is full,
•
do one of the following:
Delete unnecessary images (page 17).
–
Change the "Memory Stick Duo".
–
•
You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position.
You cannot record images while charging the flash.
•
When shooting a still image, set the mode dial to a position other than
•
Set the mode dial to
•
The image size is set to [640(Fine)] when recording movies. Do one of the following:
•
Set the image size to other than [640(Fine)].
–
Insert a "Memory Stick PRO Duo".
–
Cannot insert dates on images.
This camera does not have a feature for superimposing dates on images. By using "Picture
•
Motion Browser", you can print or save images with the date.
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring and white, black, red, or purple streaks appear on the
•
image. This phenomenon is not a malfunction.
Viewing images
Your camera cannot play back images.
•
Press
The folder/file name has been changed on your computer.
•
When an image file has been processed by a computer or when the image file was recorded
•
using a model other than that of your camera, playback on your camera is not guaranteed.
The camera is in USB mode. Delete the USB connection.
•
30
when shooting movies.
(Playback) button (page 17).
.