english
Specifications
Engine
STIHL single cylinder two-stroke
engine
Displacement:
3.75 cu.in (61,5 cm
Bore:
1.89 in (48 mm)
Stroke:
1.34 in (34 mm)
Idle speed:
2800 rpm
Ignition System
Type: Electronic magneto ignition
Spark plug (suppressed):
Bosch WSR 6 F, NGK BPMR 7 A,
Champion RCJ 6 Y
Electrode gap: 0.02 in (0,5 mm)
Spark plug thread:
M 14x1,25; 0.37 in (9,5 mm) long
Rewind Starter
Starter rope:
0.14 in (3,5mm)dia. x 37.8 in (960 mm)
Carburetor
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity
1.32 US pt (0,625 l)
Chain lubrication
Fully automatic, speed-controlled
reciprocating oil pump. Additional
manual oil flow control
58
Oil tank capacity
0.68 US pt (0,32 l)
Weight (without bar and chain
12.6 lb (5,7 kg)
3
)
Cutting Attachment
Recommended cutting attachments
for compliance with § 5.12 of ANSI
Standard B 175.1-2000
(see page 14 of this Manual):
STIHL reduced kickback bar
(with green label) for 0.325" and 3/8"
pitch:
Rollomatic with sprocket nose
40, 45 or 50 cm (16, 18 or 20 in)
STIHL low kickback chain
(with green label) for 3/8" pitch:
8.25 mm (0.325") Rapid-Micro 2
(26 RM 2)
9.32 mm (3/8") Rapid-Micro 2
(33 RM 2, 36 RM 2)
Chain sprocket:
8-tooth for 0.325" pitch spur sprocket
7-tooth for 3/8" pitch spur sprocket
1)
See definition of "low kickback
chain" on page 17.
In order to comply with the kickback
performance requirements of § 5.12
of ANSI Standard B 175.1-2000,
)
do not use replacement saw chain
unless it has been designated as
meeting the ANSI § 5.12 requirements
on this specific powerhead, or has been
designated as "low kickback" saw
1)
chain
in accordance with the
ANSI B 175.1-2000 standard.
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Other bars and chains available for this
powerhead are:
STIHL yellow-labeled bars:
for 0.325" and 3/8" pitch:
Rollomatic "S" with sprocket nose
40, 45 or 50 cm (16, 18 or 20 in)
1)
60 cm (24 in) only 3/8" pitch
Duromatic with stellite tipped nose
40, 45 or 50 cm (16, 18 or 20 in)
60 cm (24 in) only 3/8" pitch
STIHL yellow -labeled chains:
for 0.325" pitch
Rapid-Micro (26 RM),
Rapid-Super (26 RS)
for 3/8" pitch:
Rapid-Micro (33 RM, 36 RM),
Rapid-Super (33 RS, 36 RS, 33 RSL).
Rapid-Duro (33 RD)
1)
See definition of "low kickback
chain" on page 17.
MS 360