Fanimation The Marea FP8026 Serie Manual Del Propietário página 5

▲WARNING
The fan must be hung with at least 7´ of clearance from
floor to blades (Figure 1)
▲WARNING
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before hanging.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
▲WARNING
It is critical that the outlet box and the screws are
securely anchored to the building structure and capable
of withstanding a load of at least 50 lbs. Failure to verify
that the screws are properly installed could result in the
fan falling. (Figure 2)
1. Securely attach the ceiling junction box acceptable for
ceiling support into the building structure. (Figure 2)
2. Securely attach the ceiling bracket to the ceiling
junction box as shown. (Figure 3)
3. Hook the ceiling support cable from motor assembly
in the ceiling plate as shown. (Figure 4)
You can now proceed with the electrical wiring of your fan.
How to Hang Your Ceiling Fan
5
Ceiling
Floor
Figure 1
NOTE: Supply wires
omitted for clarity
Figure 2
Figure 3
Ceiling
Motor
Assembly
Figure 4
No
less than
7 ft
Outlet Box
Junction Box
Screws (2)
Ceiling support
Cable