Publicidad
Idiomas disponibles
Idiomas disponibles
circumstances.
f)
Wear suitable work clothes. Do not wear
loose clothing or jewellery. Keep hair, clo-
thes and gloves away from moving parts.
Loose clothing, jewellery or long hair can get
trapped in moving parts.
g) If vacuuming and draining devices can be
fi tted, make sure that these are correctly
attached and correctly used. The use of a
dust extraction system can reduce the danger
posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the
correct tool for your work. You will be able
to work better and more safely within the
performance limits.
b) Do not use an electric tool with a defec-
tive switch. An electric tool that cannot be
switched on or off is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or
remove the battery before making any ad-
justments to the appliance, changing ac-
cessories or put the appliance down. This
safety measure prevents starting the electric
tool unintentionally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the appliance or
who have not read these instructions to
use the appliance. Electric tools are dange-
rous if they are used by inexperienced people.
e) Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts
are broken or damaged enough that the
functioning of this electric tool is aff ec-
ted. Damaged parts must be repaired be-
fore using the appliance. Many accidents
are caused by badly maintained electric tools.
f)
Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Make sure to use electric tools, accesso-
ries, spare parts, etc. in accordance with
these instructions. Take the conditions
in your work area and the job to perform
into account. Using electric tools for any
purpose other than the one for which they are
intended can lead to dangerous situations.
Anleitung_SA_TH_ID_550_1_E_SPK8.indb 24
Anleitung_SA_TH_ID_550_1_E_SPK8.indb 24
GB
5. Service
a) Have your electric tool repaired only by
the authorized service agent, using only
genuine spare parts. This will ensure that
your electric tool remains safe to use.
Special safety information
•
Wear ear plugs when using impact drills.
The impact of noise can cause damage to
hearing.
•
Use the additional handles supplied with
the tool. Losing control of the machine can
cause injuries.
•
Hold the tool by the insulated handles
when carrying out work during which the
plug-in tool could strike concealed power
cables or its own mains lead. Contact with
a live cable will also make the metal parts of
the tool live and will cause an electric shock.
•
The drill is not designed for use with attach-
ments.
•
Do not use near vapors or inflammable li-
quids.
•
Make sure you have a steady foothold when
working on ladders and platforms.
•
Prior to drilling in walls where electricity, water
or gas lines are concealed, use a cable/pipe
detector to locate the lines.
Do not lose this safety information.
2. Layout and items supplied
2.1 Layout (Fig. 1)
1. Drill chuck with key
2. Depth Stop
3. Drill/impact drill selector switch
4. Locking button
5. ON/OFF switch
6. Speed regulator switch
7. Clockwise/Counter-clockwise switch
8. Additional Handle
9. Chuck key
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
- 24 -
08.01.2020 09:47:05
08.01.2020 09:47:05
Publicidad
