EINHELL TH-ID 550/1 E Manual De Instrucciones Original página 25

to the warranty table in the service information at
the end of this operating instructions.
•
Open this packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
1. Scope of delivery for 42.589.35:
•
Impact drill
•
Depth Stop
•
Additional Handle
•
Chuck key
•
Original operating instructions
2. Scope of delivery for 42.571.33 TH-ID 550/1
E KIT with accessory:
•
Impact Drill
•
Depth Stop
•
Additional Handle
•
Chuck key
•
Original operating instructions
•
28x Accessories, consisting of:
5x Metal drill bit
4x Concrete drill bit
4x Screw drill bit
4x Grinding heads
9x Screw socket
1x Adapter socket wrench
1x Drill bit adapter with magnetic tip
3. Proper use
The drill is designed for drilling holes into wood,
iron, non-ferrous metals and rock using the ap-
propriate bits.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Anleitung_SA_TH_ID_550_1_E_SPK8.indb 25 Anleitung_SA_TH_ID_550_1_E_SPK8.indb 25
GB
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
See warranty card of your country.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect con-
ditions.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves/ear-muffs/breathing
mask/safety goggles.
- 25 -
08.01.2020 09:47:05 08.01.2020 09:47:05