Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Manufacturer
Engine type
Engine displacement
Power
Cylinders
Max. engine speed
Ignition system
Wheel fuel
Fuel tank
Weight (dry)
Warning - Hot surface.
Engine parts, mainly the
muffler, get extremely hot
during operation.
Please let the engine and
muffler cool before handling
Use of protective goggles and
ear protectors is recommended
during operation.
Keep your distance from the
equipment when the engine
is running.
Fill with oil
and gasoline, always keeping
the 4% (25:1) ratio.
Maximum rpm must not be
exceeded.
8
TECHNICAL SPECIFICATIONS
them.
MTD Products Inc.
2-stroke, air-cooled
32.6 cc (RC33MTD), 42.7 cc (RC43MTD)
1.2 hp (RC33MTD) | 1.7 hp (RC43MTD)
1
8000 rpm
Non-platinum electronic - Magnetic sterring
Mix of gasoline with 4% oil 2-stroke (25:1)
800 ml (RC33MTD), 1000 ml (RC43MTD)
7.1 kg (RC33MTD), 7.5 kg (RC43MTD)
SYMBOLS
Ignition switch.
Cold start position.
Ignition switch.
On/operational/start.
Ignition switch.
Off/stop.
Choke settings.
1 - Closed, start position.
2 - Intermediate position.
3 - Operating position.
Wear protective boots and
gloves when operating.
18
Attention - the equipment
may throw objects.
Keep the cutting area clear of
people, children, and animals
(approximately 15 meters).
Attention - Read the
instruction manual. Please
read and make sure you
understand
and follow all instructions
contained in this manual
before assembling and
operating the equipment.
Keep cutting area clear of
people, especially children.
Publicidad
Tabla de contenido
