Cleaning And Maintenance - Medisana FTN Instrucciones De Manejo

GB
4 Miscellaneous

4.1 Cleaning and maintenance

• The sensor is the most delicate part of the MEDISANA FTN
infrared thermometer. Protect it from dirt and damage. Clean
the sensor with a cotton bud dipped in warm water or 70%
isopropyl alcohol.
• Do not immerse the thermometer in water or any other liquid.
It is not watertight.
• To clean the thermometer, use a soft cloth slightly dampened
with mild soapy water or 70% isopropyl alcohol. Do not let
water get into the unit. Only use the unit again when completely
dry.
• Never use aggressive cleaning agents, thinners, benzine or
tough brushes.
• Take care not to scratch the lens of the sensor, the display or
the housing.
• Do not use or store the unit in an environment where the
ambient temperature or humidity is too high or too low (see
operating conditions in the "Technical specifications" section) ,
in direct sunshine, in the vicinity of static electricity or in a dusty
environment.
• Remove the batteries if you do not wish to use the unit for an
extended period of time. Otherwise there is a danger that the
batteries may leak.
• If the thermometer is used as described in these instructions, no
regular maintenance or calibration is required.
4.2 Disposal
disposed of in an environmentally acceptable manner.
Please remove the batteries before disposing of the device/unit.
Do not dispose of old batteries with your household waste, but
at a battery collection station at a recycling site or in a shop.
Consult your municipal authority or your supplier for informa-
tion about disposal.
26
This product must not be disposed of together with
domestic waste.
All users are obliged to hand in all electrical or
electronic devices, regardless of whether or not
they contain toxic substances, at a municipal or
commercial collection point so that they can be