Uline SHRINKFAST H-6098 Manual Del Usuario página 6

Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
PAGE 6 OF 27
CLEANING AND MAINTENANCE CONTINUED
REPLACE IGNITER
1. Remove 5 mounting screws and remove right side of
housing. (See Figure 9)
2. Remove retaining screw holding the cable and the
contact spring. (See Figure 10)
3. Use a screwdriver to snap off the clamp. (See Figure 11)
4. Pull cable out. (See Figure 12)
5. Untie and remove ground strap. (See Figure 13)
6. Lift out trigger assembly. (See Figure 14)
0621 IH-6098