Descargar Imprimir esta página

Worx WX427 Manual Original página 15

Ocultar thumbs Ver también para WX427:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K
& K
pA
wA
Wear ear protection.
VIBRATION INFORMATION
(CUTTING WOOD/CUTTING
MENTAL )
Vibration total values (triax vector sum) determined
according to EN 62841:
Cutting wood: a
Uncertainty K = 1.5m/s²
Vibration emission
value:
Cutting metal: a
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
Compact Circular Saw
over the total working period.
Helping to minimise your vibration and noise
exposure risk.
L
: 76dB(A)
Always use sharp chisels, drills and blades.
pA
Maintain this tool in accordance with these
L
: 87dB(A)
instructions and keep well lubricated (where
wA
appropriate).
3.0dB(A)
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
VIBRATION INFORMATION
(CUTTING TILE)
Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration emission
= 6.82m/s
2
h,W
value:
= 5.63m/s
2
h,M
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
Cutting tile: a
Uncertainty K = 1.5m/s²
WARNING: The vibration emission value
during actual use of the power tool can differ
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
= 6.91m/s
2
h
15
EN

Publicidad

loading

Este manual también es adecuado para:

Wx427.2Wx427.3