Remington PG6070 Manual página 8

ENGLISH
• Wash the heads under a running tap to remove any hair clippings. Do not run
the entire unit under the tap.
• Once dry, place desired attachment head on top of the unit.
• Note: Ensure the clipper is turned off when cleaning.
BATTERY REMOVAL
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing
the battery.
• Ensure that the clipper is discharged of all power and disconnected from the
mains.
• Lift or pry the top housing and remove the top housing.
• Unscrew 2 screws located on the printed circuit board assembly.
• Lift or pry the clipper halves apart, exposing the battery chamber.
• Take out the battery and printed circuit board assembly from the battery
chamber.
• Cut the tabs on both ends of the battery and remove it from the printed circuit
board
• The battery is to be disposed of safely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste,
but recovered, reused or recycled.
8