Publicidad
Idiomas disponibles
Idiomas disponibles
Saving time,
Turbo Wash ™
Adding the Turbo Wash™ option to normal cycles reduces
cycle time while providing the same wash performance. The
option uses the Twin Spray and Optimization features of the
washer to save time without sacrificing performance.
1
Press the Power button and turn the cycle selector knob
to the desired cycle.
2
Press the
. The washer will automatically adjust
the cycle settings.
3
Set any other desired options.
C
4
Press
.
NOTE
y The Turbo Wash™ option cannot be used with all
cycles.
y Turbo Wash™ is available in the beginning of the
Cotton/Normal and Perm. Press cycles.
y Press and hold the Turbo Wash™ button to change the
default settings.
Tuning on/off melody and button tones,
Signal On/Off
The washing machine plays a melody when the wash cycle
is finished. The buttons make a sound each time a button is
pressed. The volume of the melody and button tones can be
changed or turned off as desired.
To enable signal off
Press and hold
for 3 seconds during the wash
cycle.
- Once signal OFF is set, the signal beeps once.
To enable signal on
(When the-end-of-cycle signal is disabled)
Press and hold
for 3 seconds during the wash
cycle.
- Once signal ON is set, the beeper beeps once.
USING YOUR WASHING MACHINE
Setting options during cycle
Add the desired options during the wash cycle.
Button lock feature,
Lock the washing machine to prevent children or others from
changing the cycle settings by pressing the buttons during
the cycle.
To enable child lock
Press and hold
for 3 seconds during the wash
cycle.
- When the Child Lock is enabled, a N message and the
remaining wash time are displayed, in turn, on the display
panel of the washing machine.
To disable child lock
(When the Child Lock is activated.)
Press and hold
for 3 seconds during the wash
cycle.
NOTE
y Child Lock lasts after the end of cycle. If you want to
deactivate this function, Press and hold the Pre Wash
button for 3 seconds.
Detecting weight of load,
Loading the washing machine and pressing the start button
triggers the machine to detect the weight of the load, and
displays the load size icon
seconds. If the load size icon
the weight of the load again during the cycle. This feature
will help you set the detergent amount so as to wash clothes
efficiently based on the detected load size.
NOTE
y If the washer has detected a small load size, the display
may only show one lighted bar. Only a small amount
of detergent should be used, because the amount of
clothing and the quantity of water that will be used is
small.
y The load detection routine only works with dry clothes.
Since the detection system is detecting the WEIGHT of
the load, it will be affected by unusually heavy articles
in the load. For example, a garment that is already wet
that is loaded with other items will cause the Load
Size reading to be inaccurate.
27
Child Lock
Load Size
on the display panel for 10
is not on, you can check
Publicidad
