Publicidad
Idiomas disponibles
Idiomas disponibles
15 Design and Function
This chapter provides you with important safety notices on the design and function of the
device.
15.1
Complete overview
A
Seal only For sealing the bag
without vacuum.
B
Indicator lamp (for seal) For
indicate the seal process.
C
Cancel (Stop) For switch off the
vacuuming and sealing action whenever
the operator wants to stop the operation.
D
Indicator lamp (for vacuum) For indicate the vacuum process.
E
Vacuum/Seal Draws air out of the bag and automatically change operation to seal
the bag after vacuum is completed.
F
Cover-lock To lock the cover. On the left side and right side of the cover there is a
key-press.
G
Cover-unlock Press to unlock the cover.
If you open the cover, you see the
Sealing strip:
seal but not to stick to the strip.
Warning
Please observe the following safety notices in order not to burn or scald yourself or others.
► To avoid getting burned, never touch the sealing bar while the unit is operating.
15.2
Rating plate
The rating plate with the connection and performance data can be founded on the back of
the device.
Contains a heating wire covered with teflon which allows the bag to
34
Publicidad
