Bimar VC100 Folleto De Instrucciones página 13

(plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of children
because they are potential sources of danger.
 Before connecting the appliance, check that the voltage values shown on the data
plate correspond to those of the electricity supply network. In the event of
incompatibility between the electric outlet and the plug of the heater, have the outlet
replaced with another more suitable type by professionally qualified personnel, who
will make sure that the section of the wires of the outlet is appropriate for the
absorbed power of the heater. In general, the use of adapters or extension cords is
not recommended; if their use is indispensable, they must conform to existing safety
standards and their current capacity (amperes) must not be less that the maximum
of the appliance.
 The power socket must be easy to reach so the plug can be removed quickly in case
of emergency.
 Beforeeach use, checkthattheequipmentis in goodcondition, and thatthepower
cable isnotdamaged: if in doubtconsult a qualifiedprofessional.
 Place theappliancefarfrom
Heat sources (e.g.flames, gas stoves etc.)
-
container of liquids (e.g.sinks etc) to avoid any spray or the appliance falling
-
into it (minimum distance of 2 meters)
fabrics (curtains, etc.) or unstable materials that could obstruct the air intake
-
grille; make sure that the front is free of unstable materials (dust, etc.).
 The surface on which the appliance is placed must be stable, level (otherwise the unit
may fall over) and smooth. Do not place the fan on shelves. Do not hang the unit on
the wall.
 This appliance is not intended to be operated by means of an external timer or a
separate remote control system, to avoid the risk of fire in case the device is covered
or is positioned incorrectly.
 Do not connect to thermal control systems or a programmer or timer or other device
that can automatically turn on the unit, thus avoiding the risk of damage to people,
animals or property.
13/40