Bimar VC100 Folleto De Instrucciones página 14

ASSEMBLY
Attention: always unplug the appliance before you assemble.
To assemble it, refer to figures.
Unscrew the
ring nut on
counterclockw
ise bottom of
the body, if
the nut is
screwed.
.
1
The tower fan has the following control elements:
- Timer : sets the operating time, and when it expires the appliance shuts down.
Please clockwise turn the knob at position corresponding to the desired operating
time (0-120 min); to exclude timer use, please, turn the knob anticlockwise to the
"manual" setting
- Selector: adjust intensity of the ventilation and turn on the oscillation right-left.
Couple the rear shell to
the front (align the four
holes with pins) secure
the set by turning
clockwise the ring nut.
Insert the plug through
the central hole.
Together press the two
shells inward until you
hear "click".
2
.
Place the base
on the bottom
body, in manner
to align the
holes with pins.
3
14/40
Unscrew the ring
nut on clock wise
bottom of the
body. Position
the power cord
through the
guidance of the
shell.
4