ProBreeze PB-10 Manual De Instrucciones página 5

'TIMER' Button: Set a Turn-Off timer between 2 hours, 4 hours, 8 hours, and 12
hours.
As the time remaining decreases, the Timer Indicator Light will count down until the
time remaining reaches 0 hrs and the dehumidifier turns off.
'FAN' Speed Button: Select between AUTO, LOW and HIGH modes.
-
AUTO: The dehumidifier automatically adjusts between high and low modes
depending on the humidity of the room, and your desired humidity level.
-
LOW: The dehumidifier runs with a low fan speed and a low heater setting.
-
HIGH: The dehumidifier runs with a high fan speed and a high heater setting.
'SET' Humidity Button: Sets your desired humidity level: 40%, 45%, 50%, 55%,
60% humidity.
Desired humidity level is displayed by the Humidity Indicator Lights. E.g. if humidity
is set to 40% one light will illuminate next to 40%.
If humidity is set to 45% two lights will illuminate, one next to 40% and one next to
50%.
When desired humidity is greater than actual room humidity, the Humidity Indicator
Light will flash, and the dehumidifier will enter energy saving standby mode. When in
standby mode, the heater will stop and the air outlet will close. The fan will continue
to operate for two minutes to cool the dehumidifier. After 30 minutes in standby
mode, the fan will switch on again. If the room humidity has not increased by more
than 5% of desired humidity, the dehumidifier will return to standby mode. Once the
room humidity increases by more than 5% of desired humidity, the dehumidifier will
automatically restart and return to operation.
Current Room Humidity % RH is displayed by the Room Humidity Indicator Lights.
E.g. if the room humidity is 40% RH one light will illuminate next to 40%. If the room
humidity is 45% RH two lights will illuminate, one next to 40% and one next to 50%.
English | 4