Publicidad
Idiomas disponibles
Idiomas disponibles
8. Flip-out Counter Top Stand: Allows user to place
device on counter for easy viewing.
EN
9. Magnet: Allows user to stick device to a metal
surface. For example, a refrigerator.
10. Battery Compartment: Remove battery cover
to insert 1 AAA battery.
Note: This unit is designed to remotely monitor
cooking progress. Do not remove the probe during
cooking. The internal temperature will be displayed
on the remote unit outside of the oven.
Features And Specifications
Programmable alert with preset temperatures
for specific foods.
99-hour, 59-minute countdown timer and countup
timer.
Stainless steel temperature probe with steel
mesh cable.
Temperature range of probe*: 32˚F to 572˚F
(0˚C to 300˚C).
Temperature tolerance of internal food reading**:
+/-1.8˚F (+/-1.0˚C).
Temperature readings in ˚F or ˚C.
Flip-out counter top stand and magnet.
Uses one AAA battery (included).
*If probe is not inserted into food and put directly
-4-
inside the oven,the temperature reading of oven
heat above 200˚F (93˚C) will be accurate to within
2˚F to 5˚F (1.1˚C to 2.7˚C).
Battery Installation/set Up
Slide open the battery compartment door at
the back of the unit.
Insert one (1) AAA battery according to the
polarity markings.
Replace the battery compartment door.
Remove the printed vinyl label from the LCD
screen.
Important Notes/warning
This product is not for use in microwave ovens.
Keep out of reach of children.
Do not touch hot probe or wire with bare hands
or just after cooking. Always wear a heat-
resistant glove.
Do not expose probe directly to flame. Doing
so will cause wire to deteriorate.
When not in use, slide the mode selector switch
to the off position O to conserve the battery.
Be sure to use a good quality alkaline battery
and replace it often. A weak battery will cause
the unit to lose accuracy. Always dispose of
exhausted batteries safely.
-5-
EN
Publicidad
