ThermoPro TP-16 Manual De Instrucciones página 6

Manual Temperature Setting
EN
For manual setting, press "
your desired cooking temperature.
Refer to the 'Preset Temperature Cooking Chart'
for recommended internal temperatures.
Countdown Timer
Your countdown timer can be used whether the
thermometer is in operation or not.
Slide the mode selector switch on the back of
the device to the timer position
Press HR to set the hours and MIN to set the
minutes.
Press S/S (start/stop) to start the countdown
timer. The colon between hours and minutes
will flash.
When the timer gets to 0:00, the alarm will
sound. Press S/S to silence the alarm. This
unit has a timing memory and will automatically
display the original timer setting when S/S is
pressed to silence the alarm.
To clear the time, press the HR and MIN buttons
at the same time. You can pause the timer while
it is running by pressing S/S. Press S/S again to
restart the timer.
If you are using the timer and thermometer
at the same time, you may slide the selector
" or " " to set
.
-10-
switch back to the cook position during the timing
session to view the cooking temperatures. The
timer will continue the countdown.
Countup Timer
In Timer mode, when it displays 00:00, press
MEM/S/S button to start count up timer. Press
it again to pause the timer. The timer will stop
when it is reaching 99 Hour:59 Minute.
Cleaning And Care
The device is not waterproof. Do not expose
plug of probe or plug-in hole to any liquid,
which will result in a bad connection and faulty
readings.
The probe and cable are not dishwasher safe.
They must be hand washed using hot water
and soap. Make sure to rinse and dry the probe
thoroughly before storing.
Do not submerge the base unit in water or
expose to any corrosive cleaning materials.
Wipe with damp cloth.
Limited One-Year Warranty
ThermoPro warrants this product to be free of
defects in parts,materials and workmanship for a
-11-
EN