Publicidad
Idiomas disponibles
Idiomas disponibles
When servicing the Digital multimeter, use only the same model
number or identical electrical specifications replacement parts.
The internal circuit of the Digital multimeter shall not be altered at will
to avoid damage of the Digital multimeter and any accident.
Soft cloth and mild detergent should be used to clean the surface of the
Digital multimeter when servicing. No abrasive and solvent should be
used to prevent the surface of the Digital multimeter from corrosion,
damage and accident.
The Digital multimeter is suitable for indoor use.
Turn the Digital multimeter power off when it is not in use and take out
the battery when not using for a long time. Constantly check the
battery as it may leak when it has been using for some time, replace the
battery as soon as leaking appears. A leaking battery will damage the
Digital multimeter.
1. GENERAL SPECIFICATIONS
Display
LCD Size
Polarity Indication
Over-range Indication
Low Battery Indication
Range select
Operation Temperature
Storage Temperature
Battery Type
Dimension (H x W x D)
Weight
LCD, 1999 counts updates 2/sec
55 mm x 31 mm
"-" displayed automatically
"OL" displayed
"
" displayed
Auto or manual
0 °C to 40 °C, less than 80% RH
-10 °C to 50 °C, less than 85% RH
4.5 V DC x 3 battery AAA size of
Carbon-Zinc 1,5 V DC
155 mm x 75 mm x 35 mm
Approx 157 g
Publicidad
