Basic Control; Loading The Batteries; Setting The Timer - Pioneer X-SMC22-S Guia De Inicio Rapido

Basic control

Loading the batteries

The batteries included with the unit are to check
initial operations; they may not last over a long
period. We recommend using alkaline batteries
that have a longer life.
STANDBY/ON CLOCK

1
CD USB TUNER
2
iPod
BT AUDIO AUDIO IN
EQUALIZER
1 2 3
P.BASS
3
4 5 6
BASS/TREBLE
7 8 9
RANDOM
CLEAR REPEAT
0
DISPLAY FOLDER
TUNE+
4
ENTER
MENU
/PROGRAM
PRESET VOLUME
TUNE–
+
MUTE
–
5

DIMMER
6
  
RDS
ST/MONO ASPM PTY
OPTION
© 2013 PIONEER CORPORATION.
All rights reserved.
4
En
CAUTION
• Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the
following precautions:
– When disposing of used batteries, please comply with governmental regulations or
environmental public institution's rules that apply in your country/area.
– Do not use or store batteries in direct sunlight or other excessively hot place, such as inside
a car or near a heater. This can cause batteries to leak, overheat, explode or catch fi re. It
can also reduce the life or performance of batteries.
– When inserting the batteries, make sure not to damage the springs on the battery's 
terminals. This can cause batteries to leak or over heat.
Switches the unit between standby and on
7
Press STANDBY/ON ( 1 ).
TIMER
8
Setting the clock
SLEEP
1. Press CLOCK ( 7 ) and ENTER ( 4 ).
2. Use  and ENTER ( 4 ) to set the day, hour and minute.

Setting the timer

9
1. Press TIMER ( 8 ).
2. Use  and ENTER ( 4 ) to adjust the day of the week and time.
Control the display brightness
10
Press DIMMER ( e ) to switch the display brightness in four steps.
11
Control sound and adjust volume
 Press EQUALIZER, P.BASS, BASS or TREBLE ( 9 ) to adjust sound quality. 
 Press VOLUME +/– ( d ) to adjust the listening volume. 
12
 Press MUTE ( 5 ) to mute the sound. 
MEMORY
Playing iPod/iPhone on the iPod/iPhone dock
1. Press iPod ( 2 ) and connect your iPod/iPhone to the iPod/iPhone dock.
2. Press  ( 6 ) to start playback.
+
13
Playing iPod/iPhone/iPad or USB device using the USB terminal
–
1. Press USB ( 2 ) and connect your iPod/iPhone/iPad to the USB terminal.
 14
2. Press  ( 6 ) to start playback.

DISPLAY
Listening to the audio CD
1. Press CD ( 2 ).
2. Slot a disc.
3. Press  ( 6 ) to start playback. Use numeric buttons ( 3 ) or  ( 6 ) to select the track.
4. Press REPEAT ( b ) or RANDOM ( a ) to adjust the play mode.
Listening to the radio
1. Press TUNER ( 2 ).
2. Press TUNE +/– ( c ) to tune in to the desired station.
Bluetooth® audio playback (X-SMC22 only)
1. Press BT AUDIO ( 2 ).
2. Turn on the power to the Bluetooth capable device that you wish to pair with, and perform pairing
procedure on it.

"Pairing with the unit (Initial registration)"