Bimar VP412 Folleto De Instrucciones página 11

switch, and only then remove the plug from the power socket.
Dry both the plug and the power socket carefully before
reactivating the power socket. Reconnect the plug to the
power socket and then use the appliance. If in doubt, call in
qualified staff.
• This appliance must not be operated by means of an external timer or a
separate remote control system, to avoid the risk of fire if the device is
covered and / or is positioned incorrectly. It must also not be used
together with another device that can automatically turn on the unit,
thus avoiding the risk of damage to people, animals or property.
• If the appliance breaks or there is a malfunction, switch off the appliance
and have it checked by qualified personnel; repairs carried out by
unauthorised personnel may be dangerous and nullify the guarantee.
• Ensure that the fan is switched off from the supply mains before
removing the guard.
INSTALLATION
• After removing the packing materials, check the integrity of the appliance; if you are unsure,
do not use it and ask for qualified professional help. The packing materials (plastic bags,
polystyrene, nails, etc.) must be kept out the reach of children because they are potential
sources of danger. Note: any stickers or advertising material applied to the grille must be
removed before using the appliance.
• Before connecting the appliance, check that the voltage indicated on the data plate
correspond to those of the electricity network. In the event of incompatibility between the
plug point and the plug of the appliance, have the plug replaced with q suitable one by
professionally qualified personnel, who will make sure that the section of the wires of the
outlet is suitable for the power drawn by the appliance. In general, the use of adapters or
extension cords is not recommended; if their use is necessary, they must conform to existing
safety standards and their current capacity (amperes) must not be less than the maximum of
the appliance.
• Before each use, check that the equipment is in good condition, that the power cord is not
damaged: if in doubt consult a qualified professional.
• The power socket must be easy to reach so the plug can be removed quickly in case of
emergency.
11/40