INVENTOR KRM-12L Manual De Usuario página 8

Take note the fuse specifications
l
The unit s circuit board (PCB) is designed with a fuse to provide overcurrent protection. The
specifications of the fuse are printed on the circuit board, such as: T 3.15A/250V (or 350V),
etc.
NOTE: All the pictures in the manual are for explanation purposes only. The actual shape of
the unit you purchased may be slightly different, but the operations and functions are the
same.
Note About Fluorinated Gasses
-Fluorinated greenhouse gases are contained in hermetically sealed equipment. For specific
information on the type, the amount and the CO2 equivalent in tonnes of the fluorinated
greenhouse gas (on some models), please refer to the relevant label on the unit itself.
-Installation, service, maintenance and repair of this unit must be performed by a certified
technician.
-Product uninstallation and recycling must be performed by a certified technician.
• Upon first use and for proper calibration, please allow unit to operate
continuously for 24 hours.
Power off the dehumidifier before removing the plug.
2. SOCIABLE REMARKS ENVIRONMENTAL PROTECTION
Disposal of equipment no longer used:
Please follow the instructions below, when using this dehumidifier in European countries.
This appliance requires special treatment for disposal. In the European Union, electronic
l
equipment must not be treated as domestic waste, but must be disposed of professionally
in accordance with Directive 2002/96/EC of the European Parliament and Council of 27th
January 2003 concerning old electrical and electronic equipment.
The disposal of this unit should follow all legal requirements and should not be disposed as
unsorted municipal waste.
The hazardous substances can leak into the ground water supply thus entering the food
chain, endangering your health and the environment.
Fluorinated Greenhouse Gasses are contained in hermetically sealed equipment. For
l
specific information regarding the type the amount and the CO
refer to the relevant labels of the unit.
There are several alternative solutions for disposal:
l
A) Your local municipality has established free collection systems for electronic
waste.
B) Your local retailer upon purchase of a new product.
C) The manufacturer may accept the old appliance for disposal.
D) Old appliances sometimes contain valuable resources for scrap metal dealers.
8
equivalent in tons, please
2
EN