Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
1.Gas Strip Nailer
Model
Dimensions
Length × Height × Width
Weight
Includes battery and fuel cell
Nail capacity
Cycle rate
Battery
Fuel Cell
2. Battery Charger (UC7SD)
Input power source
Charging time
Charging voltage
Charging current
Weight
NOTE: The charging time may vary according to temperature and power source voltage.
NAIL SELECTION
WARNING
Be sure to use only the genuine HITACHI nails for
the NR90GC2 or the NR90GR2. The use of any
other nails can result in tool malfunction and/or
nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with
this Nailer.
NR90GC2
Paper collated strip nails
Clipped-head nails
* This Nailer is not recommended for use with from 3" to 3-1/2" ring shank nails in pressured-treated lumber.
NR90GC2
13-21/32" × 13-29/32" × 4-1/4"
(347 mm × 353 mm × 108 mm)
7.0 lbs. (3.2 kg)
7.7 lbs. (3.5 kg)
37 nails (1 strip)
Min.
Max.
.266"
.303"
(6.8 mm)
(7.7 mm)
.131"
.113"
(3.3 mm)
(2.9 mm)
— 11 —
14-1/4" × 13-29/32" × 4-1/4"
(362 mm × 353 mm × 108 mm)
Intermittent: 2 – 3 nails per second
Continuous: 1,000 nails per hour
EB714S (1.4 Ah)
Ni-Cd battery, 7.2 V
Type No. 728-980 ...... sold separately
Single phase: AC120V 60Hz
Approx. 60 min.
(At a temperature of 70°F (20°C))
DC 7.2 V
DC 1.6 A
2.4 lbs. (1.1 kg)
NR90GR2
Plastic-collated strip nails
Full-head nails
English
NR90GR2
7.2 lbs. (3.3 kg)
7.9 lbs. (3.6 kg)
32-35 nails (1 strip)
Min.
Max.
.286"
.3"
(7 mm)
(7.6 mm)
.113"
.131"
(2.9 mm)
(3.3 mm)
Publicidad
Tabla de contenido
