Publicidad
Idiomas disponibles
Idiomas disponibles
3. ELECTRONICS UNIT
3.1. First commissioning
When switching on the electronics unit for the first time, carry out the following programming.
Successive
menus
From 10 to 200 m
Day / Month / Year
Hour / Minute
3.2. Keypad
COMMAND KEY
(depending on
model)
Switching on the electronics unit.
Switching off the electronics unit (press and hold).
MENU
Access the menus.
Boost mode starts for 24 hours.
BOOST
Water temperature display for a few seconds (only if the default display is set to « In line
display »).
T°C
Direct access to the «
Salt level display for a few seconds (only if the default display is set to « In line display »).
SALT
Direct access to the «
pH
Direct access to the «
Selecting a value or data element.
Cancellation of an entry
Back to previous menu.
Stopping Boost mode.
Command confirmation.
Entering a menu.
OK
Dismissing an alarm.
Possible settings
Français
English
Deutsch
Español
Italiano
Nederlander
Portugués
3
, in increments of 10.
In line
Dashboard
A few minutes after switching on, production starts automatically (with or without ORP
check).
When switching off, the screen and the green LED turn off while the red LED comes on.
If an alarm has been activated, press first on
This command key is only present on the DUO and PRO models.
Navigation
For each parameter, select a data item with the
buttons, then confirm with the OK button.
FUNCTION
to switch off.
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
4
Publicidad
