Record Message; Making A Call - Topcom Sologic A831 Manual De Usuario

Sologic A831

7.10 Record message

For SOS calls, the Sologic A831 will broadcast a
standard pre-recorded message unless you
record your own message.
• Press .
• Press 4 x to select "RECORD
MESSAGE".
• Press and hold and wait for the beep.
After the beep, please say the message.
Now release the
recording.
• Press to leave the menu.
The maximum length of this recording is
20 seconds.
The default message is :
"THIS IS AN EMERGENCY CALL, TO
ACCEPT THIS CALL PRESS ZERO"
7.11 Check message
The message you recorded in previous chapter
can be verified.
• Press .
• Press 5 x to select "CHECK MESSAGE".
• Press to listen to the recorded
message.
• Press to leave the menu.
To erase the recording, press
playback.
7.12 Pair new pendant / Remove pendant
The pendant is registered in the Sologic A831 by
its ID code. In case of repair or other reasons it
can be necessary to register the pendant to the
telephone. The pendant can also be deleted from
the Sologic A831.
To pair a pendant :
• Press .
• Press 2 x to select "PAIR NEW
PENDANT".
• Press . "PAIRING" will be displayed.
• Press to start the pairing process.
Now press the button on the pendant.
"DONE" will appear if the pairing is successful.
8
• Press
To remove a pendant :
• Press
• Press 2 x
• Press
• Press
• Press
button to finish the
• Press
8 Using the Sologic A831

8.1 Making a call

• Enter the telephone number.
• Press
• Pick up the handset or press
during
The call duration timer will start in the display 4
seconds after the number was dialed.
to leave the menu.
.
to select "PAIR NEW
PENDANT".
. "PAIRING" will be displayed.
or to select "DELETE?"
to delete the pendant.
to leave the menu.
to delete a wrongly entered digit.
make a hands-free call.
The volume of the handset can be set to
HI or LO by using switch
During a call made with the handset you
can switch to hands-free by pressing
and hanging up the handset.
The hands-free volume can be adjusted
using the volume button
In case the telephone is connected to a
PBX system it might be necessary to add
a pause after the PBX access code. The
phone can generate a 4 second pause
time.
Example : 0 P 012345678
Press to enter a pause.
or to
25 .
.
9
Sologic A831