Publicidad
Idiomas disponibles
Idiomas disponibles
C
• After everything is dry place appliance back into service.
Replace the lamp
• This product contains a light source exempted of energy
efficiency class.
• Light source in this product can be replaced by the end
user.
• Please unplug the appliance before any light source
change operation.
• The light source shall be removed at the end of the
product's useful life,with sorting and recycling done
separately.
Follow below process to replace the lamp:
1. Set the temperature regulation knob at number «0» to
switch off the appliance.
2. Unplug the appliance to make sure the appliance is
disconnected from main power supply.
3. Remove the screw of the lamp cover.
4. Pull the lamp cover out.
5. Unscrew the lamp.
Useful information
17
EN
Publicidad
