3
Installation Instruction
The following must be noted
Electrical connection
The appliance is fitted with a plug and
must only be connected to a properly
installed earthed socket. Only a
qualified electrician who takes the
appropriate regulations into account
may install the socket or replace the
connecting cable. If the plug is no
longer accessible following installation,
an all-pole isolating switch must be
present on the installation side with a
contact gap of at least 3 mm. Contact
protection must be ensured by the
installation.
Fitted units
The installation cabinet must not have
a back panel behind the appliance.
Minimum installation height: 850 mm.
Ventilation slots and intakes must not
be covered.
Installing the oven - Fig. 2
Note: Do not trap or kink the mains
lead.
17