Multiplex RR EasyGlider 26 4205 Manual De Instrucciones página 11

RR EasyGlider
RR EasyGlider Electric
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you
are completely satisfied with the contents of your kit. However, we would ask you to check all the parts (using the Parts List) before
you start construction, as we cannot exchange components which you have already worked on. If you find any part is not
acceptable for any reason, we will readily correct or exchange it. Just send the component to our Model Department bearing
adequate postage. Please be sure to include the purchase receipt and a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents in
terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that we
cannot entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating them safely
requires a certain level of technical competence and manual skill, together with discipline and a responsible attitude at the
flying field. Errors and carelessness in building and flying the model can result in serious personal injury and damage to
property. Since we, as manufacturers, have no control over the construction, maintenance and operation of our products, we
are obliged to take this opportunity to point out these hazards and to emphasise your personal responsibility.
Additional items required for the RR EasyGlider / EasyGlider Electric:
Adhesive: cyano-acrylate ("cyano") and activator
Use medium-viscosity cyano glue (not styrofoam cyano) in conjunction with activator ("cyano kicker"). Epoxy adhesives produce
what initially appears to be a sound joint, but the bond is only superficial, and the hard resin breaks away from the parts under
load. Hot-melt glue (from a glue gun) can be used as an alternative.
MULTIPLEX radio control system components for the RR EasyGlider and EasyGlider Electric:
PiCO 5/6 UNI receiver
alternatively
or
Micro IPD UNI receiver
alternatively
MagicMixer #1 For two-channel radio control transmitter without mixer (Glider)
For three-channel radio control transmitter without mixer (Electric)
Y-lead (UNI) For four-channel radio control transmitter with separate rudder control
Battery charger:
MULTIcharger 5008 DC (charge current 100 mA ... 5 A)
or
MULTIcharger LN-2010 (charge current 200 mA ... 2 A)
for use with 12 V power supply, e.g. car battery
Additional items for RR EasyGlider Electric only
We recommend the 8 / 1500 mAh battery, # 15 6037
MULTIPLEX Permabatt NiMH flight battery (AA cells)
or MULTIPLEX Permabatt NiMH flight battery (AA cells)
MULTIPLEX Li-Batt (Li-Po) flight battery
MULTIPLEX Li-Batt (Li-Po) flight battery
If required: connector, speed controller / flight battery
Additional items for RR EasyGlider only
NiMH receiver battery, UNI
Mini switch harness with UNI charge socket
Tools:
Scissors, balsa knife, small cross-point screwdriver, side-cutters, soldering iron, 1.5 mm A / F allen key (supplied).
Note: please remove the picture pages from the centre of the building instructions.
Specification
Wingspan
Overall length
Fuselage length
All-up weight
Wing area
Wing loading
RC functions
# 26 4205
# 26 4207
RR EasyGlider
1800 mm
1130 mm
1060 mm
approx. 710 g
FAI approx. 41.6 dm²
approx. 17 g / dm²
Elevator, rudder, ailerons
GB
35 MHz, e.g. A-band
40 MHz
35 MHz, e.g. A-band
40 MHz
1 - 8 NiCd / NiMH cells
1 - 10 NiCd / NiMH cells
and 1 - 4 Lithium-Polymer cells
7 / 1500 mAh
8 / 1500 mAh
2 / 1-1500 mAh
2 / 1-2000 mAh
6-pin green
4 / 1500 mAh
RR EasyGlider Electric
1800 mm
1115 mm
1020 mm
with standard power system approx. 880 g
FAI approx. 41.6 dm²
approx. 21 g / dm²
Plus throttle
Order No. 5 5920
Order No. 5 5921
Order No. 5 5971
Order No. 5 5972
Order No. 7 3000
Order No. 8 5030
Order No. 9 2525
Order No. 9 2523
Order No. 15 6030
Order No. 15 6037
Order No. 15 7011
Order No. 15 7016
Order No. 8 5213
Order No. 15 6029
Order No. 8 5037
11