Beurer SatinSkin HL 35 Instrucciones De Uso página 16

6. CLEANING AND MAINTENANCE
Risk of electric shock!
Unplug the device each time before cleaning. Clean the device using only the methods specified.
1. Do not use any abrasive cleaning products or hard brushes.
2. Remove the shaver attachment
3. Remove most of the hair from the shaver attachment
4. Then clean the shaver attachment
5. Do not use the device again until it is completely dry.
7. ACCESSORIES AND REPLACEMENT PARTS
To purchase accessories and replacement parts, please visit www.beurer.com or contact the service
address for your country (see the service address list). Accessories and replacement parts are also
available from retailers. Replacement recommended every 12 months.
Designation
2 x shaver attachments and 1 x exfoliation attachment 576.28
8. DISPOSAL
For environmental reasons, do not dispose of the device in household waste at the end of its
service life. Dispose of the device at a suitable collection point in your country. Dispose of
the device in accordance with the EC Directive on Waste Electrical and Electronic Equipment
(WEEE). If you have any questions, please contact the local authorities responsible for waste
disposal.
Batteries must not be disposed of in the household waste. They may contain poisonous heavy metals
and are subject to special refuse treatment.
The codes below are printed on batteries containing harmful substances:
Pb = battery contains lead,
Cd = battery contains cadmium,
Hg = battery contains mercury.
5
from the shaver head
5 and the device thoroughly under running water.
16
1
(Figure ).
D
with the cleaning brush.
5
Item number and/or order number