Publicidad
Idiomas disponibles
Idiomas disponibles
5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
1
Light area
2
Skin contact sensor
3
Cooling indicator lamp
"Auto flash" indicator lamp
4
5
Skin contact indicator lamp
Safety features
The device also has a built-in UV filter that blocks harmful UV rays.
The device has a built-in skin contact sensor
that no light pulses can be emitted when the device is held in the air. A light pulse is only
emitted when the skin contact sensor
6. FIRST STEPS
6.1 Preparing for use
Before you begin using the device, you must first make appropriate preparations and then
carry out a skin sensitivity test:
1. Using the hair and skin colour chart (on the back page of these instructions for use),
check which intensity level is suitable for you. An "x" in the table indicates that the device
is not suitable for you to use.
2. Before each application, shave the body parts that you wish to treat. Do
not use a hair removal cream instead of a razor.
3. Ensure that the skin areas to be treated are shaved, dry and clean (free
from any residue such as powder, cream, make-up or deodorant).
WARNING
Do not clean the skin with flammable liquids such as alcohol or acetone shortly before
using the device.
6
Trigger button
7
Intensity display (5 levels)
8
ON/OFF/intensity button
9
USB-C connection
2
to protect the eyes. It was developed so
is in sufficient contact with the skin.
2
34
Publicidad
