DRAINING SOLUTION TANK
1. Pull solution tank drain hose off of hose barb at
rear of machine and empty remaining solution
(Figure 12).
FIG. 12
2. Replace drain hose.
MACHINE MAINTENANCE
To keep machine in good working condition, simply
follow machine's daily, weekly and monthly
maintenance procedures.
FOR SAFETY: Before leaving or servicing machine,
turn off machine and unplug cord from wall outlet.
ATTENTION: Contact an Authorized Service Center
for machine repairs. Machine repairs performed by
other than an authorized person will void the
warranty.
DAILY MAINTENANCE
(Every 4 Hours of Use)
1. Empty and rinse out recovery tank thoroughly
(Figure 13).
FIG. 13
EX- -SC- -412 / EX- -SC- -1530 (04- -10)
Home
Find... Go To..
2. Remove float shut--off screen from recovery tank
cover and clean (Figure 14).
FIG. 14
3. Drain remaining water from solution tank
(Figure 15).
FIG. 15
4. Clean solution tank fill port strainer.
5. Remove any entangled carpet fibers and debris
from brush (Figure 16).
FIG. 16
OPERATION
EN
9