Introduction To Panel - Baxtran ARX Manual De Usuario

5. INTRODUCTION TO PANEL

• Introduction to indicator lamps
Identification
~
→0←
Net
kg
Hold
Ac
•
Introduction to operation keys
Operationwithout special specification refers to short press on keys.
Each key takes the following functions according to the F mesure settings.
Key symbol
10
Analysis
Dynamic and static indication
center indication
Identification of gorses weight and net
weight
Weight unit
Weight maintenance
Voltage indication of battery and power
supply
Normal weighing state
Weight maintenance key
Short press → F2.1 = 1, keep/cancel.
F2.1 = 2, switch between percentage and weight.
F2.1 = 5, switch between quantity and weight.
Long key → enter setting menu.
Accumulation key
Short key → F2.1 = 4, include display weight in accu-
mulation value.
Long key →
F2.1 = 3, select scale to sample target
weight.
F2.1 = 4, accumulate weight of scale display.
F2.1 = 5, count sampling of scale.
Unit conversion key
Short key → in weighing state, switch weight unit. The
corresponding unit indication lamp is on.
Skin removal key
Short key → net weight turns to gross weight; induction
lamp of net weight "Net" is off.
Skin removal key
Short key → gross weight turns to net weight. Indication
lamp of net weight "Net" is on. Conduct skin removal
operation for multiple times.
USER'S MANUAL ARX
Remark
The lamp is on when scale is in dynamic
state, otherwise, the lamp is off.
The lamp is on when the absolute value
of weight on the scale is less than ±0.2d,
otherwise the lamp is off.
The lamp is on in net weight and off in
gross weight
For indicating current unit
The lamp is on when the weight is locked,
otherwise it is off.
The green lamp is on when the voltage of
the adapter and battery is normal, and the
red lamp is on in undervoltage state.
Set state
Return to the last menu.
No definition.
Flicker bit is on the left.
Flicker bit is on the right.
Digit flicker position reduces.
EN