F3 Energy-Saving Parameter Setting; F4 Printer Configuration (Non Modify); F5 Maintenance And Service; Function Description - Baxtran ARX Manual De Usuario

F3 ENERGY-SAVING PARAMETER SETTING

F3.1 Time-out Screensaver Time Setting
Selectable Parameters: 0~ 99 minutes, (default value: 30 minutes)
If set to be 0, this function shall not be allowed.
During the screen protection, the display will randomly show " ".
F3.2 Energy-saving Time Setting for Auto Power-off
Settable Parameters: 0~250 minutes. (default value: 150 minutes)
If set to be 0, this function shall not be allowed.
F3.3 Display Brightness Control
Selectable Parameters: 0---- low light level
F3.4 Real-time clock, date setting
F3.5 Real-time clock, time setting

F4 PRINTER CONFIGURATION (NON MODIFY)

F4.2.4 Printing languages selection
CHI: CHINESE \ ENG: ENGLISH \ FRA: FRENCH \ ESP: SPANISH \ ITA: ITALIAN \ POR: PORTUGUESE

F5 MAINTENANCE AND SERVICE

F5.1 Key test
Instrument display¡, press
, [lb/kg] and
quit key test.
F5.2 Display screen test
All strokes of meter display will have self-inspection, to observe whether there is lacks of strokes.
Press
F5.3 Display current internal code
The display will show internal code of current instrument after smoothing. Press

7. FUNCTION DESCRIPTION

WEIGHT MAINTENANCE FUNCTION F2.1 = 1
Operation method
In normal weighing state, press
"Hold" indication lamp is on. Only when weight setting value≥F2.2 is displayed, weight maintenance operation is effective.
Otherwise, it will return to weighing state after invalid operation information [--no--] is shown for a second.
If weight is in locked state, press
tion lamp is off.
If it is in weight locking state, refuse to remove skin, clear skin and setting operation.
14
1 ---- middle light level (default value)
2 ---- high light level
, , ,
in order, and the instrument displays
or to quit test of display screen.
on the operation panel, the will instrument lock display weight of the current scale, and
again to cancel locking of weight and return to normal weighing state, and "Hold" indica-
USER'S MANUAL ARX
, , , ,
EN
and , press to
or to quit the interface.