Publicidad
Idiomas disponibles
Idiomas disponibles
USE
Insert the hook sides into the towing eyes from
top to bottom, mount the centre tube and pin it
with the tension bolts from the top to the bottom.
Then tension the finished tow bar and close the
holders by moving the internally mounted buffer
support tubes and pin them in the tightest
position behind the buffer support tube.
The tow bar must run straight, thus in the
direction of the vehicle axles, while driving. It
may be necessary to move the tow bar
sideways if the eyelets are mounted offset to
the side.
When driving through corners, the vehicle being
towed must follow the towing vehicle in its track.
ENVIRONMENTAL PROTECTION
Recycle undesired materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in an environmentally
friendly manner. Check with your local waste disposal authority about recycling measures.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
