ESAB EM 215ic Instrucciones De Uso página 13
Ocultar thumbs
Ver también para EM 215ic:
- Instrucciones de uso (46 páginas) ,
- Instrucciones de uso (56 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
3 TECHNICAL DATA
EMS series
•
ESAB EMS 215ic power source
•
Tweco Fusion™ 180 A MIG torch with 10 ft (3 m) cable / Tweco® pigtail with 0.023 in.
(0.6 mm), 0.030 in. (0.8 mm), 0.035 in. (0.9 mm) contact tips and Operator manual all
in one bag
•
Victor® GF-250-50-580 argon flow-gauge regulator
•
Gas hose, 6.5 ft (2 m) Male 5/8-18UNF
•
Tweco® 200 A electrode holder & lead assembly, 13 ft (4 m), 50 mm dinse
•
Tweco® 200 A ground clamp & lead assembly, 10 ft (3 m), 50 mm dinse
•
1 bag of 4 general purpose stick electrodes (E6013, 1/8 in.),
•
ER70S-6, 0.030 in., 2 lb, 4 in. (100 mm) bobbin
•
Drive roll, 0.023 in./0.030 in. (0.6/0.8 mm) V-groove for mild steel and stainless wires
(installed on drive system)
•
Drive roll, 0.023 in./0.035 in. (0.6/0.9 mm) V-groove for mild steel and stainless wires
•
Drive roll, 0.030 in./0.035 in. (0.8/0.9 mm) V-knurled for flux cored wires
•
Power adapter (230 V – 120 V, 15 A)
•
Safety manual
•
CD (contains instruction manual - English/French/Spanish, and optional accessory
product data sheets)
•
Welding chart (French) Milar
•
Quick start guide
EM series
•
ESAB EM 215ic power source
•
Tweco Fusion™ 180 A MIG torch with 10 ft (3 m) cable / Tweco® pigtail with 0.023 in.
(0.6 mm), 0.030 in. (0.8 mm), 0.035 in. (0.9 mm) contact tip and Operator manual all
in one bag
•
Victor® GF-250-50-580 argon flow-gauge regulator
•
Gas hose, 6.5 ft (2 m) Male 5/8-18UNF
•
Tweco® 200 A ground clamp & lead assembly, 10 ft (3 m), 50 mm dinse
•
ER70S-6, 0.030 in., 2 lb, 4 in. (100 mm) bobbin
•
Drive roll, 0.023 in./0.030 in. (0.6/0.8 mm) V-groove for mild steel and stainless wires
(installed on drive system)
•
Drive roll, 0.023 in./0.035 in. (0.6/0.9 mm) V-groove for mild steel and stainless wires
•
Drive roll, 0.030 in./0.035 in. (0.8/0.9 mm) V-knurled for flux cored wires
•
Thickness gauge tool
•
Power adapter (230 V – 120 V, 15 A)
•
Safety manual
•
CD (contains instruction manual - English/French/Spanish, and optional accessory
product data sheets)
•
Welding chart (French) Milar
•
Quick start guide
3
TECHNICAL DATA
Voltage
Primary current
I
GMAW - MIG
max.
I
GTAW - TIG
max.
0463 407 001
230 V, 1 ~ 50/60 Hz
30 A (27.6 A at 25% duty
cycle)
19 A
- 13 -
EMP 215ic
120 V, 1 ~ 50/60 Hz
Breaker 20 A: 28.6 A
Breaker 15 A: 20.3 A
Breaker 15 A: 20.8 A
© ESAB AB 2017
Publicidad
