EUFY RoboVac LR30 Hybrid+ Manual Del Propietário página 15

English
Wet the mopping cloth and wring it until it does not drip, then attach the cloth to
3
the mopping module.
Remove the water tank.
4
Open the water inlet cover to fill with water, then close the cover.
5
26 EN
Do not use any cleaning solution, as your floor may become slippery and
therefore affect the cleaning effect.
Install the water tank and the mopping module under RoboVac with a click.
6
The mopping mode is only intended for a clean floor without stubborn
stains. To achieve a better mopping effect, it is recommended to clean the
floor with RoboVac three times before mopping.
Start cleaning. RoboVac will automatically vacuum and mop.
7
When RoboVac finishes cleaning, remove the mopping module.
8
Remove the dust box and the water tank.
9
English
EN 27