English
LED Indication
You can see the status of RoboVac from the LED indicators.
and
Status
Pulsing blue
Charging
Solid blue
Standby / Cleaning / Fully charged
Solid red
Low power and returning to auto empty station
• RoboVac is off.
• To conserve power, the light automatically turns
Off
off when RoboVac is not docked to the auto empty
station and has been inactive for 10 minutes.
Flashing blue
Waiting for Wi-Fi connection
RoboVac has an error.
Flashing red with voice alert
Refer to the "Troubleshooting > Voice Alert" section in
this manual for solutions.
Map Navigation and Management
Navigation
Once RoboVac starts to auto clean, it will move away from the auto empty station and
automatically scan your house to generate maps, intelligently determine its cleaning route,
and divide the space into zones. The cleaning paths are planned along the walls, following
a Z-shaped cleaning method to clean one zone at a time.
14 EN
Real-Time Mapping and Floor Plan
Real-time mapping helps RoboVac easily learn the environment of your home to generate
the most efficient cleaning path. A floor plan will be built after cleaning. The map will be
updated in real-time during each cleaning session to ensure normal navigation.
To create a complete floor plan:
1. Open your doors so that RoboVac can map each room.
2. Remove any objects that may be in the way or that might entangle RoboVac.
Repositioning and Remapping
If the position of RoboVac / auto empty station is adjusted or the surroundings are
changed significantly, RoboVac will try to reposition and remap to match the surroundings.
• If the repositioning is successful, RoboVac will resume cleaning.
• If the repositioning fails, RoboVac will remap to ensure normal navigation with a new
cleaning.
• When using for the first time, make sure RoboVac starts cleaning from the
auto empty station.
• During cleaning, do not move RoboVac frequently. If moved, place RoboVac
back in the original position.
Using Your RoboVac
Important Tips Before Use
A
B
D
E
English
C
F
EN 15