Triton TMNRTR Instrucciones De Uso página 13

Max cutter diameter:
Max cutter shank:
Plunge adjustment:
Plunge range:
Parallel fence range:
Fence rod diameter:
Dust extraction port
dimensions:
Inner:
Outer:
Insulation class:
Cord length:
Ingress protection:
Dimensions (L x W x H):
with plunge base:
with trimmer base:
no base:
Weight:
As part of our ongoing product development, specifications of
Triton products
may alter without notice.
Sound & vibration information
Sound pressure L
PA
Sound power L
WA
Uncertainty K
Weighted vibration a
h
Uncertainty K
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level
exceeds 85dB(A) and limit the time of exposure if necessary. If
sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly
fitted and provides the correct level of sound attenuation for the
level of sound produced by your tool.
817698_OwnerManual.indd 13 817698_OwnerManual.indd 13
30mm
8mm
1) Free plunge
2) Table height winder
3) Micro winder
0-40mm
0-130mm
8mm
35mm
40mm
3m
IP20
290 x 280 x 150mm
260 x 150 x 96mm
245 x 80 x 125mm
2.9kg
85dB(A)
96dB(A)
3dB
6.167m/s²
1.5m/s²
WARNING: User exposure to tool vibration can result in loss
of sense of touch, numbness, tingling and reduced ability to grip.
Long-term exposure can lead to a chronic condition. If necessary,
limit the length of time exposed to vibration and use anti-vibration
gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect.
Use the figures provided in the specification relating to vibration to
calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined
according to international standards. The figures represent normal
use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased
levels of noise and vibration. www.osha.europa.eu provides
information on sound and vibration levels in the workplace that
may be useful to domestic users who use tools for long periods
of time.
The declared vibration total value has been measured in
accordance with a standard test method and may be used for
comparing one tool with another. The declared vibration total value
may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission during actual use of the
power tool can differ from the declared total value depending on
the ways in which the tool is used. There is the need to identify
safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to
the trigger time).
Carefully read and understand this manual and any label attached
to the tool before use. Keep these instructions with the product for
future reference. Ensure all persons who use this product are fully
acquainted with this manual.
Even when used as prescribed it is not possible to eliminate all
residual risk factors. Use with caution. If you are at all unsure of the
correct and safe manner in which to use this tool, do not attempt
to use it.
General Power Tool Safety Warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) power
tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
EN
13
11/11/2022 10:25 11/11/2022 10:25