ALPA LITEsurf LA251 Guia De Inicio Rapido página 7

3. Selecting the number of cut-offs (ISO 4287).
Use to move to the N° cut-off option, then press
confirm.
The following screen is displayed:
Use to move to the required option, then press
confirm. The currently selected value is displayed in larger
characters compared to the other values.
Then press to return to the main menu.
4. Selecting the length of the stroke (ISO 12085).
Use to move to the L Mis option, then press
confirm.
The following screen is displayed:
Use to move to the required option, then press
confirm. The currently selected value is displayed in larger
characters compared to the other values.
Then press to return to the main menu.
5. Selecting the measurement start delay.
Use to move to the Ritardo (Delay) Option then press
to confirm.
The following screen is displayed:
Use to move to the required option, then press
confirm. The currently selected value is indicated by the cursor
at the bottom.
Then press to return to the main menu.
to
to
Figure 8. Set length of cut-off screen.
to
to
Figure 9. Set length of stroke screen.
to
Figure 10. Set measurement start delay screen.
EN
IT
DE
ES
RU
PL
7