Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Unpacking the machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packaging. Make sure the small
triangle foam (a) is removed with the bottom packaging together. If not, lay the
unit down on the side surface and remove it manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
Warning!
• You must remove the transport bolts from the backside before using the
product.
Loosen the 4
transport bolts with a
spanner.
Warning!
• Packaging material (e.g. Films,
Styrofoam) can be dangerous for
a
children.
• There is a risk of suffocation ! Keep all
packaging well away from children.
Remove the bolts
including the rubber
parts and keep them
for future use.
12
Close the holes
using the cover
caps.
V .1
Publicidad
