Descargar Imprimir esta página

ALPA MEGAwhiz BA010 Manual De Instrucciones página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
ALPA_MICROMETER_MEGAwhiz
MAINTENANCE
Keep the micrometer in a dry environment when not using it for a longer period of time to avoid
rust formation of the metallic parts. Do not close the measuring spindle with the anvil when not
in use. Keep a distance of 1-2 mm. Do not use aggressive products (alcohol, trichloroethylene or
others) to clean the plastic parts. Do not keep the micrometer in places which are exposed to sun,
heat or humidity. Important : dry carefully all metal parts of the instrument after effect of moisture to
guarantee a perfect mechanical functioning and to avoid rust formation.
SWITCHING ON, INITIALIZATION
After having pressed on a button, introduced the measuring unit, the instrument shows «SET» for
the initialization of the reference point. Bring back the measuring spindle on the anvil (or on a Gauge
block). Press then [SET] or [MODE]. The instrument is now ready (Check the Preset).

Publicidad

loading