Garland 1480 QGW Manual De Instrucciones página 26

English
ÍNDEX
1. Introduction
2. Normative and security measures
3. Warning signs
4. Machine description
5. Start up instructions
6. Machine usage
7. Maintenance and service
8. Troubleshooting
9. Transport
10. Storage
11. Recycling and machine disposal
12. Warranty conditions
CE Declaration of conformity
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Ref.:GBICHIPPER1480QGWV23M0323V1
DATE OF PUBLICATION: 08/03/2023
DATE OF REVISION: 08/03/2023
1. INTRODUCTION
26 Thank you for choosing this Garland machine. We
are confident that you will appreciate the quality and
27 performance of this machine, which will facilitate your
task for a long period of time. Remember that this
31 machine has the most extensive and expert technical
assistance network which you can consult for the
32 maintenance, troubleshooting and purchase of spare
parts or accessories.
34
Warning! Read all safety warnings and
39 all instructions. The failure to observe
all warnings and instructions below can
40 result in fire and/or serious injury. Before using this
machine, carefully read the information in this manual
44 on correct setup and safe techniques.
46 The chipper is only designed to shred pieces
of wood with a maximum diameter of 12 cm. It is
46 prohibited to shred any other material (for example
metal, stones, plastics and any other material). If
46 you want to shred roots, remove the sand, mud or
other residues before shredding. Any other use of
47 the shredder not described here, annuls the warranty
responsibility of the manufacturer.
48
Save all warnings and instructions for future
reference. If sold in the future, remember to give this
manual to the new owner.
Remember that the machine operator is responsible
for the damages and accidents caused to other people
or things. The manufacturer will not be liable in any
way for damages caused by improper or incorrect use
of this machine.
26/148