Publicidad
Idiomas disponibles
Idiomas disponibles
References
Source name
Display information: Main (Supplementary)
CD or USB
For CD-DA:
Track title (Artist)
Effect*2
time (Date)
For MP3/WMA/AAC/WAV/FLAC files:
Song title (Artist)
Effect*2
name (Folder name)
back to the beginning
iPod USB/iPod BT
Song title (Artist)
Effect*2
time (Date)
BT AUDIO/ALEXA
Song title (Artist)
Effect*2
time (Date)
AUX
Source name (Date)
Synchronization Effect*2
*2 During Music Synchronization Effect, the illumination color or brightness level of the buttons
changes and synchronizes with the music level (depending on the color setting made for
[PRESET] on page 32).
Track title (Artist) with Music Synchronization
Track title (Disc title)
Track title (Date)
back to the beginning
Song title (Artist) with Music Synchronization
Song title (Album title)
Song title (Date)
File name (Date)
Playing time (Date)
Song title (Artist) with Music Synchronization
Song title (Album title)
Song title (Date)
back to the beginning
Song title (Artist) with Music Synchronization
Song title (Album title)
Song title (Date)
back to the beginning
Source name (Date) with Music
back to the beginning
Troubleshooting
Symptom
Sound cannot be heard.
Playing
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
File
appears.
Source cannot be selected.
The unit does not work at all.
Playing
Correct characters are not
displayed.
Playing
DAB reception is poor.
"CHK ANTENNA"
"RELATED SERV FOUND"
• Radio reception is poor.
• Static noise while listening
to the radio.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 5)
Reset the unit. (Page 4)
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 6), some characters may not be displayed
correctly.
Make sure [ON] is selected for [DAB ANT POWER].
(Page 8)
Check the DAB antenna. If a passive antenna (without
a booster) is used, set [DAB ANT POWER] to [OFF].
(Page 8)
• Press the volume knob to activate Soft-Link.
(Page 8)
• Press
to cancel.
Connect the antenna firmly.
ENGLISH
35
Publicidad
