b) Clean the spark arrester screen if it is blocked.
Clean weekly if your product has a catalytic
converter. Clean monthly if your product does not
have a catalytic converter.
CAUTION:
screen causes the engine to become too
hot which causes damage to the engine.
CAUTION:
is frequently blocked, it can be a sign that
performance of the catalytic converter is
decreased. Speak to your servicing dealer to
examine the muffler. A blocked spark
arrester screen causes overheating and
results in damage to the cylinder and piston.
To clean the cooling system
The parts of the cooling system are the air intake on the
starter (A), the fins on the flywheel (B), the cooling fins
on the cylinder (C) and the cylinder cover (D).
D
A
1. Clean the cooling system with a brush weekly or
more frequently if it is necessary.
2. Make sure that the cooling system is not dirty or
blocked.
CAUTION:
cooling system can make the product too
1309 - 004 - 23.03.2021
A blocked spark arrester
If the spark arrester screen
C
B
A dirty or blocked
hot, which can cause damage to the
product.
To examine the spark plug
CAUTION:
recommended spark plug type. Incorrect
spark plug type can cause damage to the
product.
•
Examine the spark plug if the engine is low on
power, is not easy to start or does not operate
correctly at idle speed.
•
To decrease the risk of unwanted material on the
spark plug electrodes, obey these instructions:
a) Make sure that the idle speed is correctly
adjusted.
b) Make sure that the fuel mixture is correct.
c) Make sure that the air filter is clean.
•
If the spark plug is dirty, clean it and make sure that
the electrode gap is correct, refer to
on page 21 .
•
Replace the spark plug if it is necessary.
To apply grease to the two-piece shaft
•
Apply grease to the end of the drive shaft after each
30 hours of operation.
To clean the air filter
CAUTION:
very dirty or soaked with fuel must always be
replaced.
Always use the
Technical data
An air filter that is damaged,
17