Makita DGA402 Manual De Instrucciones página 7

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Applicable grinding wheel
Applicable cut-off wheel
Applicable wire wheel brush
Spindle thread
Max. spindle length
No load speed (n ) / Rated speed (n)
0
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Only for model DGA402 / DGA452
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Max. wheel diameter
Max. wheel thickness
Max. wheel diameter
Max. wheel thickness
Max. wheel diameter
Max. wheel thickness
with BL1840B
D.C.14.4 V Model
D.C.18 V Model
DGA402
100 mm
6.4 mm
105 mm
100 mm
M10
18 mm
1.9 - 3.4 kg
D.C. 18 V
BL1415N / BL1430B / BL1440 / BL1460B
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
Always operate with two hands.
Do not use the wheel guard for cut-off
operations.
7 ENGLISH
DGA450 DGA452
115 mm
7.2 mm
115 mm
3.2 mm
115 mm
20 mm
M14 or 5/8" (country specific)
23 mm
-1
11,000 min
317 mm
2.0 - 3.4 kg 2.1 - 3.5 kg
D.C. 14.4 V D.C. 18 V
PDC01