Beurer medical BM 58 Manual De Instrucciones página 21

10. Mains part port
11. Display
Touch screen activation switch
The device features a touch screen display. To prevent the
screen from being activated accidentally, keep the touch
screen activation switch set to OFF when the device is not
in use. To operate the device, move the touch screen activa-
tion switch to ON. When the touch screen display is touched
(START/STOP button
Tip: You can switch off the device at any time by setting the
touch screen activation switch to the OFF position.
Cuff holder
Thanks to the cuff holder on the underside of the device,
you have the option of conveniently storing the cuff. To do
so, push out the cuff holder with both thumbs until it locks
into place (see also Chapter: Inserting battery).
Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Measured pulse
5. Release air (arrow)
6. Memory display, average value ( ),
morning ( ), evening (
or MEM button), a beep is output.
9
8
7
)
6
7. WHO classification
8. "Change battery" icon
9. Arrhythmia recognition
PC interface
The Beurer blood pressure monitor also allows you to trans-
fer your measured values to the PC.
To do this you require a USB cable (included in delivery) and
the Beurer "Health Manager" PC software.
The software can be downloaded free of charge from the
download area under Service at www.beurer.com.
System requirements for the Beurer "Health Manager"
computer software
1. Supported operating systems:
• Windows XP SP3
• Windows Vista SP1 or later
• Windows 7
• Windows 7 SP1
1
• Windows 8
2. Supported architectures:
2
• x86 (32 bit)
• x64 (64 bit)
3
3. Hardware requirements:
• Recommended: at least Pentium 1 GHz or faster with at
4
least 1 GB RAM
5
21