RCA RCR311S Manual Del Usuario página 11

RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 11
FORWARD
10. Once your component turns off,
STOP
•
ON OFF
11. To confirm that the component
Code Retrieval
Once you've programmed the remote to control your
components, you may want to record the codes for future
reference. If you used the Direct Code Entry method, this is
easy. Just find the codes you programmed in and make a note
of them in the boxes on the next page. If you used one of the
Code Search methods to program your remote, you will need
to retrieve each component's four-digit code. Retrieving the
actual code and writing it down will save you time if you
ever need to program the remote again (e.g., if programming is
lost when you change the batteries). If the codes are recorded,
you can use the Direct Entry method to reprogram your
remote to control your components, which is quick and easy.
1. Press and hold the component key
•
VCR DVD
•
TV
SAT CBL
ON•OFF
2. While holding the component key
INFO
ON•OFF
3. After holding down both keys for
4. Release both keys. The illuminated
the REVERSE key is pressed, the
illuminated ON•OFF key blinks.
If you accidentally press
Note:
the REVERSE key after your
component responds, press and
release the FORWARD key. Then,
wait two seconds to see if your
component turns off again.
you have found the correct code.
You must save the new code by
pressing and releasing the STOP
key. The illuminated ON•OFF key
turns off. You must press the
STOP key to save the code or the
correct code will not be stored!
key is programmed with the
correct code for maximum
functionality, test the component.
Attempt to control a variety of the
component's functions with the
remote. If some of the features of
your components do not work,
different codes in the list can be
tried until you find the code that
allows the remote to control the
majority of your component's
functions. See the section entitled
"Testing the Code for Maximum
Functionality" on page 8 for
more information.
(TV, VCR•DVD, SAT•CBL) whose
code you wish to retrieve. The
illuminated ON•OFF key turns on.
down, press and hold the INFO
key. The illuminated ON•OFF key
turns off.
three seconds, the illuminated
ON•OFF key turns back on.
ON•OFF key remains on.
11