Publicidad
Idiomas disponibles
Idiomas disponibles
Anleitung_LB5_4010413:_
9.7 Storage
Important!
Pull out the mains plug and ventilate the
equipment and all connected pneumatic
tools (see 9.7.1). Switch off the compressor
and make sure that it is secured in such a
way that it cannot be started up again by
any unauthorized person.
Important!
Store the compressor only in a dry location
which is not accessible to unauthorized
persons. Always store upright, never tilted!
Oil may leak out!
9.7.1 Releasing excess pressure
Release the excess pressure by switching off
the compressor and using the compressed air
which is still left in the pressure vessel, e.g. with
a compressed air tool running in idle mode or
with a blow-out pistol.
9.8 Ordering spare parts
The following information is required for all
orders for spare parts:
Equipment model/type
■
Equipment article number
■
Equipment ID number
■
For our latest prices and information please go
to www.isc-gmbh.info
9.9 Transport (Figure 1)
Switch off the equipment and pull out the
■
power plug before lifting and moving the
compressor.
Use the transport handle (1) to move the
■
compressor.
Use the transport handle (1) and the grip
■
(12) on the pressure vessel (7) to lift the
compressor.
Note the equipment's weight!
Transport the compressor only in an upright
■
position and secure it against tilting so that
no oil runs out.
Secure the compressor in accordance with
■
the regulations in force for transporting
equipment in motor vehicles.
28.02.2011
13:52 Uhr
Seite 53
10. Disposal and recycling
The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused
or recycled. The equipment and its accessories
are made of various types of material, such as
metal and plastic. Defective components must
be disposed of as special waste. Ask your
dealer or your local council.
To comply with European Directive 2002/96/EC
concerning old electric and electronic
equipment and its implementation in national
laws, old electric power tools have to be
separated from other waste and disposed of in
an environment-friendly fashion, e.g. by taking
to a recycling depot.
Recycling alternative to the return request:
Instead of returning the equipment to the
manufacturer, the owner of the electrical
equipment is obliged to ensure that the
equipment is properly disposed of if he
abandons ownership. The old equipment can
be returned to a suitable collection point that
will dispose of the equipment in accordance
with the national recycling and waste disposal
regulations. This does not apply to any
accessories or aids without electrical
components supplied with the old equipment .
For EU countries only
Never place any electric power
tools in your household refuse.
GB/
MT
53
Publicidad
