User Selection - Medisana CardioCompact Instrucciones De Manejo

3.6 Display of time and date
How the time and date are displayed, depends on the selected
mode (Travelling clock or blood pressure measurement mode):
Example display in
Travelling clock mode
If an alarm is activated, a corresponding symbol
the upper left section of the display (only in Travelling clock mode)
along with the alarm time
The blue background light is activated after mode selection or after
a button is pressed. It will only be actived for a few seconds and
then it automatically switches off to save energy.

3.7 User selection

The MEDISANA CardioCompact Blood pressure monitor can
save the measured values to one of two possible memories
(user 1 or 2) or can measure values without saving any data (guest
mode). Each of the two memories offers 500 memory slots.
Adjust the display tilt angle in that way, that the marking of the tilt
3
mechanism
Press the SNOOZE-button
(a corresponding symbol will flash in the right upper section of the
display). With the SNOOZE-button
memory (1 or 2) or guest mode (G):
Press the START-button
seconds to confirm the selection.
e
of the next alarm.
indicates "Blood pressure measurement mode".
1
6
or don't press any button for at least 5
3 Getting started
Example display in
blood pressure mode
to enable the user memory selection
1
you can now select a user
w
will appear in
GB
z
31